Cantilever Rack and Pallet Racks in Independence, KY

Tire stacks, printing paper and machine-tool parts weigh very different amounts. One beam rating does not fit them all. We rate each zone by its heaviest load per level.

Frame depth follows the pallet. Common 42-inch uprights carry 48-inch-deep pallets, while deeper loads need deeper frames. Bay length follows how many loads sit side by side.

Where tenants share a building, rows end at the lease line. The drawing marks it.

Send a floor sketch with columns and doors marked. Photos of current storage help too. From there we draft zones, count positions and price every component separately.

Lumber, bar, tube and roofing bundles do not belong on pallets. Cantilever rack arms carry them from an open face. No front upright blocks the forklift or side-loader.

We space columns so long loads are supported without sagging. Arm length follows bundle depth. Arm capacity follows your heaviest bundle per level.

Toebben Dr buildings date from about 1999 to 2005. They range from about 10,000 to 275,000 SF, all single-story. That spread means some jobs are a few runs and others fill a floor.

We take each building as measured. Column grid, dock doors and truck type set the layout. Smaller buildings may need only a few cantilever runs and a handful of pallet rows. Larger ones might hold full zones of each, with separate aisles for side-loaders and standard forklifts.

Building-materials yards often store long stock beside boxed goods. We zone the floor so cantilever runs get swing room. Pallet aisles stay sized for the forklift. Side-loaders and counterbalance trucks need very different room. Bundles longer than the aisle is wide need a turning plan, which we draw before choosing column positions.

One CAD layout shows both zones and their counts. One itemized quote covers both.

The area is reached from Mt. Zion Rd and KY-17, a short run to I-71/75. Crews and freight arrive easily. Installs are handled by experienced crews we schedule and manage.

Outgrowing your space? Our warehouse relocation service moves rack to the new building. Walton and Florence are both close by.

What cantilever setup suits lumber and metal stock in Independence?

How do you size beams for heavy tire or paper loads?

How long before we can start loading?

What aisle do we need beside cantilever runs?